Tri-Clamp Adaptor – Coupler Thread x 1/2-inch TC 1/2″ Tri-Clamp X Coupler Thread (Micromatic).     American D’System keg couplers (tappers) utilize a special non-standard thread size.  For this reason,  a specific adapter is necessary to convert the special thread for use with tri-clamp fittings. Use this adapter to modify the coupler to accept your [...]

  This coupler head can be used for both keg filling, washing and decanting!    Both the CO2 (gas) and Beer sides of this tap are equally large unlike standard couplers which have a reduced diameter CO2 inlet.  Unlike standard couplers the “Wash-head tap” does not have check valves at either the inlet or outlet [...]

  Made of solid stainless, this is the single most useful tool for the quick removal of American Sankey (D’ System) drop-in style, keg valves. This one is very difficult to break!  Keep the following items in stock so that you’re prepared to keep kegs in service at all times:   New lock rings to [...]

  SABCO has supplied quality keg name labels to the brewing industry for many years.   Long ago,  a simple paint stripe was adequate to help brewers to identify their kegs and also to help as a deterrent to theft.   Today,  brewers are using every tool they can to assure that they get their kegs returned. [...]

  Shut-Off Ball-Valve This short (two inch overall) ball valve has a keg coupler valve thread and is used specifically to turn off the beer flow from a standard keg coupler. This thread will not fit a 1/2″ outlet. You’ll also find this valve on both ends of the Micromatic wash-head coupler. This is a [...]

  If you own kegs that have a previous owner’s name engraved into the top dome, use these crescent shaped labels to make those engravings disappear! These are designed to match the silver, matte luster of standard, stainless kegs. Kegs vary in luster according to their age and manufacturer, however, you’ll discover that this particular [...]

  SABCO’s federal warning labels are found on kegs and vessels throughout the USA. These federal labels have met the standards required by law, but also those of SABCO and the largest brewers in the country. Using an incredibly tough adhesive for stainless application and a thick laminated surface, they have been proven to stay [...]

     KEG CAPS – VENTED SABCO’s keg caps are the very best available. These are tough vented plastic in bright colors. Contact SABCO for full-color, custom logo labels that can be applied directly to these caps to identify your brewery and beer style.  These are designed for use with standard American Sankey keg necks. [...]

                   Standard US couplers deliberately use a special thread size so that tap connections cannot accidentally be confused with other brew-house equipment.  This coupler nut, gasket and tailpiece combination,  can be attached to any US Micromatic keg coupler.   It will fit either the gas or beer side [...]

  Heavy duty and reliable. This is the universally accepted coupler for use with virtually all American version (D’ System) keg valves. This is the same valve type used in the USA by AB, Miller, Coors, Labatt, and Molson. Standard beer coupling outlet thread for use with American tap lines. Micromatic 5/16″ CO2 inlet barb [...]